How To Thread A Mini Sewing Machine Step By Step Guide | How To Use mini Sewing Machine Complete Guide
Threading a mini sewing machine is a straightforward process that can be done in a few simple steps out lines.
- First, make sure the spool of thread is firmly in place in the spool holder.
- Pull the thread through the thread guide at the back of the machine, then thread it through the tension disc.
- Pull the thread through the take-up lever, then through the thread guide at the front of the machine.
- Next, insert the thread into the needle from the front to the back, and make sure the thread is secured in the needle eye.
- Pull the thread back to the take-up lever, and make sure the thread is looped around the lever.
- Pull the thread down the left side of the machine, then thread it through the lower thread guide.
- Finally, thread the needle with the bobbin thread. To do this, insert the bobbin into the bobbin case, then pull the thread through the slit in the case. Pull the thread up and around the hook of the bobbin case, then insert the case into the machine.
Going through this article you also learn that, how To Use Mini Sewing Machine. This article will also go over how to thread a mini sewing machine- what part of the fabric you want to stitch goes through the needle goes through this tool! You will also learn how to take care of your new sewing machine so that it keeps working smoothly for years to come.
Connect the battery
Now that you have completed all of the steps, it is time to connect your mini sewing machine’s power source! You will need to either use AC power or USB power to do this.
AC powered machines require that you connect them to a wall socket which usually comes in one of two configurations: standard household current (110 volts) or 220 volts. Make sure you know what type of plug wire adapter you need for each configuration.
Household current requires only a basic three-pronged cord connection, but make sure that you purchase an appropriate length cable so that you can easily reach the outlet!
USB powered sewing machines do not require any kind of power supply connector; they are self contained units that work via USB ports. Most new technology has a built in feature that uses the USB port as power, therefore there is no need to worry about buying extra equipment!
After you have found a good source for both types of power, carefully disconnect the old cables before attaching the new ones. Do not pull on the wires too much as this could damage the device.
Loosen the machine's belt
When your fabric is stuck in the sewing area, it can be difficult to pull it out. This happens when the thread breaks or the top of the material catches on something.
The most common cause for this is when the needle gets stuck in the down position. If you try to push the button up to use the needle again, it will not go all the way up and may get caught under the other stitches already made.
When you sew with a mini sewing machine, there are two things that you have to remember. First, make sure that you loosen the belt before putting the machine away. Second, make sure that you remove the bobbin case before folding the machine up.
If you forget either one of these steps, your stitch quality may be poor because the machine has no tension.
Remove the machine's cover
The first thing you will need to do is remove the sewing machine’s cover or plate that covers the motor. This can be done by lifting up the plate with your hands or using a tool called a needle puncher, which are both very common equipment tools in most home supply stores.
After this, put the plate away where it belongs (in a closet or drawer) and then take out the motor. You have now prepared the space for threading the bobbin!
Reminder: Make sure to pull out all of the components of the sewing machine, including the presser foot and feed dogs. These must not get re-attached until after threading the bobbin has been completed.
Now that everything is ready, let's start stitching!
Thread the bobbin
It is time to begin threading the bobbin! To do so, take one length of monofilament thread and knot off one end. Then insert the bobbin into the throat area of the fabric and push down slightly to make room for the thread to go through.
Next, rotate the bobbin 90 degrees and position the threaded tail under the other leg of the seam. Now pull up gently on the top part of the bobbin to create more slack in the thread, and then use the second length of thread to stitch across the bottom edge of the material.
Thread the needle
When you are finished with your sewing machine, it is time to thread your needle. This is one of the most important steps as you could potentially pull down the fabric or break something in the process!
There are two different types of needles used for sewing machines: regular cotton sewing machine use a perforated (hole) needle, and universal craft use a smooth needle. For our purposes here, we will focus only on using a plain old white threaded needle.
Your sewing machine probably has both very fine and heavier weight threads already attached, so do not worry about removing those first! Simply find a length of thread that matches the material you are seaming and begin stitching away!
General tips: when folding over the raw edge, make sure to match up the edges properly and press them outwards instead of together like you would normally.
Put the machine in your lap
In addition to holding the fabric, another important function of a sewing machine is feeding the material through for stitching or cutting. This is where most people get confused or frustrated when trying to sew with their machine!
Most machines have what we call a feeder mechanism that grabs the top edge of the fabric and pulls it through the needle position. This feature does not work if you do not have the proper setting up of the machine first!
Sewing machine brands make changing this setting very easy. Just take off the cover, slide the lever down, and then put the cover back on! Some even have a small button or pin you use to lock it into place. Make sure to check out your machine’s manual or settings online to be certain this tool has been removed.
Once you have modified this setting, you can stitch away! If you find that the thread gets tangled as the fabric passes the needle, you may need to increase the bobbin speed just a bit. That way the bobbing motion works more smoothly and easily.
Sit slightly forward in your chair
When you sew with a mini machine, one thing that can get tricky is keeping the fabric from rolling away as you work. As you know, when sewing, you need to feed the material through the needle frequently!
To prevent this, you have to hold onto some part of the fabric while you are stitching it back together. This way, you do not have to worry about grabbing too much of the fabric, it stays attached to you!
One trick I learned was to sit slightly forward in your seat while working with the mini machine. By doing so, you are able to use your hands more efficiently, and keep better control over the fabric.
Use a lubricant
When sewing with a mini machine, you will need to use some type of lubrication to ensure your stitches are smooth and moving properly.
There are two main types of lube to use when seaming with a miniature machine. The first is baby oil or petroleum jelly. This is a good start as it works both for fabric and for the motor.
You can also use vegetable, mineral, or silicone gel oils which have different functions depending on what kind of stitching you want to do. Just make sure they are not too thick as this could cause drag in the thread.
Thicker glues may work better if you find that there is more movement needed before the needle starts to stitch smoothly.
Lift the presser foot
The next thing you will need to do is lift the presser foot. Your fabric will now shift slightly downward, exposing some of the sewing machine bed or work area.
This is what allows the needle to stitch down into the fabric as it moves up and then back down. If your stitches are very smooth and tight, this is not needed but for more fuzzy, looser threads, lifting the foot is necessary!
Once again, if you feel that the thread has caught on something while stitching, drop the needle and pull the thread through to see if there’s anything stuck. If so, cut off the excess and reattach later.
If the bobbin runs out before the top loop can be completed, simply remove the empty spool, refill the bobbin, and repeat the process until it works correctly.